Kod: MGR12
MOLYKOTE® G-Rapid Plus Paste Solid lubricating paste with particularly low friction coefficient for assembly and running-in of metallic components Features & benefits • Low friction coefficient • High pressure-absorption capacity • Prevents seizure and scoring • Suppresses stick-slip • Reduces formation of fretting corrosion • Facilitates disassembly • Good coverage • Provides emergency running performance • No intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS) Composition • Mineral oil • Solid lubricants Applications Suitable for the press-fit production of all types of machine elements, as a running-in lubricant for new machines and gears, as permanent lubrication of machine elements that are submitted to slight or intermittent movement only, as well as for drilling, sawing and thread-cutting. Used to lubricate threaded spindles, splined shafts, tooth gearing, worm gearing, moving screws, fittings, pumps, guides on machine tools, as well as for fitting ball and roller bearings, pulleys, wheel flanges and bolts. How to use Clean the sliding surfaces or contact areas, then apply paste with a brush, cloth, synthetic sponge or window leather. Do not use in excess as with grease lubrication. Vigorous rubbing into metal surface will improve adhesion. Do not mix with greases or oils. To enable this product to be applied more quickly and cleanly to larger areas, it is advisable to use the spray can. If using the spray, MOLYKOTE® G-Rapid Plus Paste Spray should be applied in a sweeping motion to obtain a thin, uniform coating. Avoid over application.
